WiseRoot+ process

X5 Power Source Pulse+, R500 Wire Feeder EUR+

Requires the use of the voltage sensing cable (refer to AX MIG Welder interconnection cable).

The WiseRoot+ welding process improves the quality of root pass welds. WiseRoot+ is based on accurate measurement of arc voltage.

Before welding, attach the voltage sensing cable to the workpiece. For optimal voltage measurement, connect the earth return cable and the voltage sensing cable close to each other and away from the other welding units' cables.

WiseRoot+ is a synergic MIG/MAG process optimized for open-gap root pass welding. The process is based on precise measurement of voltage between the welding gun nozzle and the workpiece. The measurement data serves as input for the current control. The process is suitable for root pass welding in all positions, and provides a smooth and spatter-free arc.

>>  To take WiseRoot+ into use, go to AX Manager's Welding parameters view and apply WiseRoot+. Optionally, go to the Memory channels view and create a new memory channel with WiseRoot+ process.

>>  Adjust the wire feed speed in the Home view.

>>  Fine-tune the heat output while welding in the Home view.