How to get welding programs

The use of welding programs and Wise and MAX features and processes is possible with the X5 FastMig Auto and Pulse system configurations (see General). WiseRoot+, WiseThin+ and MAX Position processes require a pulse welding system (with the Wise processes specifically a Pulse+ power source is required).

By default, the equipment comes with a welding program work pack preinstalled. These work packs cover the basic welding tasks with the automatic 1-MIG and pulsed welding processes.

The additional welding programs, Wise processes (WiseRoot+, WiseThin+) and MAX processes (MAX Cool, MAX Speed, MAX Position) for each individual X5 FastMig equipment are installed at the time of purchase according to your specific welding requirements. This can be done by your local Kemppi dealer. Welding programs as well as the advanced welding features can also be added later on.

For more information on the available X5 FastMig welding program options and installing the welding programs or software updates, contact your local Kemppi dealer or go to Kemppi.com.

The manual MIG process doesn't require additional welding programs.

For applying the welding programs installed on your X5 FastMig equipment, refer to AP/APC control panel: Applying welding programs (AP/APC).

The list of installed welding programs on your equipment can be seen in the control panel's info view under Welding software.

The welding programs included in the X5 FastMig work packs are shown here: Technical data > Welding program work packs.