1-MIG

X5 WF AP/APC

1-MIG or "Auto" is a MIG/MAG welding process where the welding voltage is defined automatically when you adjust the wire feed speed. The voltage is calculated based on the welding program in use. The process is suitable for all materials, shielding gases and welding positions. 1-MIG supports WiseSteel, WisePenetration and WiseFusion features, as well as various optimized welding programs.

>>  To take 1-MIG into use, go to the Memory channels view and select an existing memory channel with 1-MIG process.

If there aren't any 1-MIG memory channels available, create a new one for 1-MIG process by selecting an available 1-MIG welding program for the channel. Follow the instructions in AP/APC control panel: Applying welding programs (AP/APC).

When the X5 equipment is in MIG mode, the '0' memory channel is always reserved for the manual MIG process. All other memory channels are available for any process.