Memory channels

To change the memory channel, press the memory channel button on the control panel. This selects the next available memory channel.

The top of the X3 FastMig control panel display indicates which of the five available memory channels is currently selected:

If the welding parameters have been changed from the ones saved on the memory channel (i.e. a work channel has been created), this is indicated with a dotted line in the channel selection:

To save the adjusted welding parameters to a memory channel, follow these steps:

1.

Long-press the memory channel button in the control panel to enter the memory channel saving mode.

2.

Turn the right control knob to change the memory channel (where to save).

3.

Press the right control knob to select the memory channel (where to save).

>>  Once saved, the newly saved memory channel is automatically selected.

On start-up, X3 FastMig starts into the last used MIG memory channel.

Each operation mode (MIG, MMA, Gouging) has its own set of memory channels.

A new 1-MIG or Pulse MIG memory channel can be created using the material selection wizard. For more information, refer to Base settings for 1-MIG and Pulse MIG.