Connectivity charts: TIG

These charts describe the physical connectivity of the equipment in question only and should not be considered as a general recommendation for any welding task.
Always check that the welding gun/torch model's load capacity is suited for the currents used. E.g. Flexlite model "GX 253G" load capacity is 250 A, whereas "GX 403G" load capacity is 400 A.

 

Use the below selectors to hide/show content in the connectivity chart.

SuljettuFlexlite TX TIG torches

SuljettuRemote controls

* Discontinued product.

Letters with the Flexlite product model names stand for:

W = water-cooled, G = gas-cooled, MN = multi-neck, S = long cable.

Connector types mentioned in brackets ().

 

For more information on equipment configurations: Kemppi Configurator

 

<<< Connectivity charts: MIG Connectivity charts: MMA >>>