Connectivity charts: MIG

These charts describe the physical connectivity of the equipment in question only and should not be considered as a general recommendation for any welding task.
Always check that the welding gun/torch model's load capacity is suited for the currents used. E.g. Flexlite model "GX 253G" load capacity is 250 A, whereas "GX 403G" load capacity is 400 A.


= Primary compatibility

o = Secondary compatibility (welding gun remote not supported by the connected equipment)


Use the below selectors to hide/show content in the connectivity chart.

ЗакрытоFlexlite GX(3) MIG guns

ЗакрытоFlexlite GX(5) MIG guns

ЗакрытоFlexlite GX(8) MIG guns

ЗакрытоFlexlite GC MIG guns

ЗакрытоFlexlite GF MIG guns

ЗакрытоFlexlite TX TIG torches (MIG)

ЗакрытоSuitable handheld remote controls

* Discontinued product.

Letters with the Flexlite product model names stand for:

W = water-cooled, G = gas-cooled, MN = multi-neck, S = long cable.

Connector types mentioned in brackets ().


For more information on equipment configurations: Kemppi Configurator


  Connectivity charts: TIG >>>