Wise processes: using WiseRoot+
The WiseRoot+ welding process improves the quality of root pass welds.
WiseRoot+ is a synergic MIG/MAG process optimized for open-gap root pass welding. The process is based on precise measurement of voltage between the welding gun nozzle and the workpiece. The measurement data serves as input for the current control. The process is suitable for root pass welding in all positions, and provides a smooth and spatter-free arc.
To adjust the welding power / wire feed speed, in the Control Pad's Welding view, turn the left knob.
To fine tune the heat while welding, in the Control Pad's Welding view, turn the right knob.
Figure: WiseRoot+ Welding view
When using WiseRoot+, depending on the welding program, you can adjust the following parameters through Settings > Parameters:
| • | Wire Feed Speed |
>> min: adjusts the minimum set value for wire feed speed
>> max: adjusts the maximum set value for wire feed speed
| • | Fine tuning: adjusts the heat of the arc. |
| • | Dynamics: -10...+10. Adjusts the short circuit behavior. On the minus side, the arc is softer. On the plus side, the arc is harder. |
| • | StartPower: -30...+30. Adjusts the power level for arc ignition. |
| • | StartLevel: -30...+30. Fine tunes the arc length for arc ignition. |
| • | StopPower: -30...+30. Adjusts the power level for arc stop. |
