WiseThin+ process

X5 PS Pulse+X5 WF AP/APC

The additional voltage sensing cable is required.

WiseThin+ is a synergic MIG/MAG process whose short-arc features are optimal for welding sheet metals (plate thickness 0.8 - 3.0 mm). It is based on precise measurement of voltage between the welding gun nozzle and the workpiece.

Before welding, attach the voltage sensing cable to the workpiece. For optimal voltage measurement, connect the earth return cable and the voltage sensing cable close to each other and away from the other welding units' cables.

The measurement data serves as input for the voltage control. The process reduces heat input, deformation and spatter. WiseThin+ is also optimal for position welding with thicker plates.

>>  To take WiseThin+ into use, go to the control panel's Welding parameters view and apply WiseThin+. Optionally, go to the Memory channels view and create a new memory channel with WisedThin+ process.

>>  To adjust the wire feed speed, turn the left knob when in the main welding view (Home view).

>>  To fine-tune the heat output while welding, turn the right knob when in the main welding view (Home view).