MAX Position process
X5 PS Pulse/Pulse+X5 WF AP/APC
MAX Position is a synergic MIG/MAG welding process optimized for vertical fillet welds (position: PF). MAX Position automatically switches between two separate power levels. The two power levels can use the same welding process or two different welding processes.
>> To take MAX Position into use, go to the control panel's Welding parameters view and apply MAX Position. Optionally, go to the Memory channels view and create a new memory channel with MAX Position process.
>> In Welding parameters view, MAX Position frequency can be adjusted and the optional WiseFusion feature can be applied. The ratio of the two power levels is preset.
>> To adjust the average wire feed speed while welding, or in the control panel's Home view, turn the left control knob. The adjustment's effect on the plate thickness is also shown.
>> To fine-tune the welding voltage while welding, or in the control panel's Home view, turn the right control knob.
MAX Position supports these filler wire and shielding gas combinations:
| • | Fe solid & Ar + 18% CO2 (1.0 mm, 1.2 mm) |
| • | Fe solid & Ar + 8% CO2 (1.0 mm, 1.2 mm) |
| • | Fe MC & Ar + 18% CO2 (1.2 mm) |
| • | Ss solid & Ar + 2% CO2 (1.0 mm, 1.2 mm) |
| • | AlMg & Ar (1.0 mm, 1.2 mm) |
MAX Position supports these plate thicknesses:
| • | 3...12 mm |
MAX Position utilizes also other welding processes, depending on the material and equipment type:
| • | Fe & Fe MC: 1-MIG (with low power) and Pulse MIG (with high power) |
| • | Ss & Al: Pulse MIG (throughout the power range). |
