MAX Cool process
X5 WF AP/APC
MAX Cool is a synergic MIG/MAG welding process that is designed for root pass welds and sheet metal applications. MAX Cool is suitable for all welding positions and provides a smooth arc, reducing spatter.
>> To take MAX Cool into use, go to the control panel's Welding parameters view and apply MAX Cool. Optionally, go to the Memory channels view and create a new memory channel with MAX Cool process.
>> To adjust the wire feed speed while welding, or in the control panel's Home view, turn the left control knob. The adjustment's effect on the plate thickness is also shown.
>> To fine-tune the heat output while welding, or in the control panel's Home view, turn the right control knob.
MAX Cool supports these filler wire and shielding gas combinations:
| • | Fe solid & Ar + 8…25 % CO2 (1.0 mm, 1.2 mm) |
| • | Fe solid & CO2 (1.0 mm, 1.2 mm) |
| • | Ss solid & Ar + 2 % CO2 (1.0 mm, 1.2 mm) |
| • | CuSi3 & Ar (1.0 mm) |
| • | CuAl8 & Ar (1.0 mm). |
