X3 control panel symbols and icons summary

Control panel button functions:

	Save memory channel (long press)
	Change memory channel
	Operation mode selection (long press)
	MIG welding process selection
	Wire inch (long press)
	Trigger logic selection
	Cable calibration (long press)
	Material selection
	Water cooling (long press)
	Welding parameters
	Gas test (long press)
	Remote operation (torch remote control)

Welding processes and modes:

	Manual MIG process
	Automatic MIG process (1-MIG)
	Pulse MIG process
	MMA mode
	Gouging mode

Material selection (1-MIG and Pulse MIG):

	Filler wire material
	Filler wire diameter
	Shielding gas

Device settings:

	Trigger logic 2T
	Trigger logic 4T
	Remote mode: Memory channels
	Remote mode: Welding parameter
	Safety lock
	Water cooling (if in use)
	Cable calibration
	Cable resistance
	Cable inductance
	Voltage reduction device (VRD) is on

Welding parameters and memory channels:

	Wire feed (speed)
	Pulse current
	Dynamics
	Fine tuning
	Hot start
	Crater fill
	Post current
	Memory channel (selected and saved)
	Work channel (selected and not saved)

Firmware update:

	USB memory stick connected
	Update (in progress)
	Update ready

Warning and caution indicators:

	Warning: This symbol indicates an error or fault that requires attention, but doesn't prevent welding
	Error: This symbol indicates an error or fault that prevents welding and require immediate action
	Error or fault with power source
	Error or fault with wire feeder
	Error or fault with cooling unit
	Overheating error
	Error (error code is shown together with this text)
	Voltage reduction device (VRD) error (blinking)