General

These instructions describe the use of Kemppi's Minarc T 223 ACDC welding device designed for demanding professional use. The equipment consists of the Minarc T 223 ACDC power source with a control panel, optional Master Cooler 05M cooling unit and an optional cart.

The Minarc T 223 ACDC power source is suitable for TIG and pulsed TIG welding with both direct current (DC) and alternating current (AC), as well as MMA welding with DC current. Minarc T 223 ACDC can also be used for post-weld cleaning and polishing to remove impurities from the welded area.

Minarc T 223 ACDC is designed to be used together with Kemppi's Flexlite TX TIG torches.

Important notes

Read the instructions through carefully.

Items in the manual that require particular attention in order to minimize damage and harm are indicated with the below symbols. Read these sections carefully and follow their instructions.

Note: Gives the user a useful piece of information.

Caution: Describes a situation that may result in damage to the equipment or system.

Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.

Other links

Kemppi symbols: Userdoc.

General notices: Userdoc.

Disclaimer While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the specification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit the contents of this guide without prior permission from Kemppi. The source language for this document is English. All other language versions available are either professional human translations or advanced machine translations. Any feedback regarding translation terminology can be sent to userdoc@kemppi.com.