General
These instructions describe the use of Kemppi's MAX WeldClean cleaning kit for post-weld electrolytic cleaning. This method is used to restore the corrosion protection of stainless steel welds by removing contaminants from and correcting discoloration on weld seams. The MAX WeldClean cleaning kit is intended for professional use.
The MAX WeldClean cleaning kit is compatible with the following Kemppi Flexlite TX welding torch models:
|
•
|
TX 163 GF, TX 163 GVD09 |
|
•
|
TX 225 G, TX 225 GF, TX 225 GS, TX 225 GFL |
|
•
|
TX 223 G, TX 223 GS, TX 223 GE, TX 223 GVD13 |
For more information on Flexlite TX welding torches, refer to Kemppi Userdoc.
The MAX WeldClean cleaning kit is compatible with the following Kemppi welding devices:
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular attention to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the below symbols. Read these sections carefully and follow their instructions.
|
Note: Gives the user a useful piece of information. |
|
Caution: Describes a situation that may result in damage to the equipment or system. |
|
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury. |
You can also download the safety instructions by using these links:
Kemppi symbols: Userdoc.
|
Disclaimer
While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the specification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit the contents of this guide without prior permission from Kemppi.
|
