MAX Cool process
Available as an option in Master M 355.
MAX Cool is a short arc MIG/MAG welding process that is designed for root pass welds and sheet metal (thin sheet) applications. It’s fully current-controlled welding process. MAX Cool does not require the use of a separate voltage sensing cable.
MAX Cool is suitable for all welding positions and provides a smooth arc, reducing spatter.
>> To take MAX Cool into use, press the control panel's welding process button and select MAX Cool.
>> To adjust the wire feed speed, in the Main view, turn the left control knob. The adjustment's effect on the plate thickness is also shown.
>> To fine-tune the heat output, in the Main view, turn the right control knob.
MAX Cool supports these filler wire and shielding gas combinations:
| • | Fe solid & Ar + 8…25 % CO2 (1.0 mm, 1.2 mm) |
| • | Fe solid & CO2 (1.0 mm, 1.2 mm) |
| • | Ss solid & Ar + 2 % CO2 (1.0 mm, 1.2 mm) |
| • | CuSi3 & Ar (1.0 mm) |
| • | CuAl8 & Ar (1.0 mm). |
