Pulse welding

Pulse welding is possible with the Master M 205 machine (220...240 V).

Pulse

Pulse is an automatic MIG/MAG welding process where the current is pulsed between the base current and the pulse current. The advantages of Pulse are a higher welding speed and deposition rate compared to short-arc welding, lower heat input compared to spray-arc welding, a spatter-free globular arc and smooth appearance of the weld. Pulse is suitable for all position welding. It is excellent for welding aluminum and stainless steel, especially when the material thickness is small.

>>  To take Pulse into use, press the control panel's welding process button and select Pulse.

>>  The corresponding pulse welding parameters become available for adjustment. For more information, refer to 'Pulse welding parameters' in Control panel: Welding parameters.