Equipment description
This section lists the components included in the Kemppi GX-ROBOT System. Some components are required depending on whether the robot is a hollow-wrist or non-hollow-wrist model, while others may be chosen according to user preferences.
Cable packs
| • | GX-R Cable T1 |
>> For a hollow-wrist robot
>> Water- and gas-cooled options
| • | GX-R Cable T2 |
>> For a non-hollow-wrist robot
>> Water- and gas-cooled options
In model names (e.g. GX-R CABLE T1 S G (1040) / GX-R CABLE T1 S W (1040)): S = slim, G = gas-cooled, W = water-cooled. The number at the end in brackets indicates the cable length.
Welding torches
| • | GX-R Torch |
>> Water- and gas-cooled options
In model names (e.g. GX-R TORCH 400G 340MM 22D S50 / GX-R TORCH 500W 340MM 22D S50): G = gas-cooled, W = water-cooled, MM = neck length, D = neck angle, S = second neck angle.
Robot adapter flanges
| • | X-R Flange |
>> Robot-specific models
In model names (e.g. X-R FLANGE 100 - 6 - M10 #14): 100 = pitch circle diameter, 6 = number of mounting holes, M10 = mounting hole size, #14 = serial number identifying the individual flange.
Collision sensors
| • | X-R Sensor T1 |
>> For a hollow-wrist robot
| • | X-R Sensor T2 |
>> For a non-hollow-wrist robot
Mounting brackets
| • | X-R Bracket |
>> For a non-hollow-wrist robot
>> Size S/M
Wire brake
| • | GX-R Wire Brake |
>> Water- and gas-cooled options
>> Optional
Welding torch alignment tool
| • | GX-R Torch Adjuster |
>> For water- and gas-cooled welding torches
>> Optional
Cable adapter
| • | GX-R 10 Pin Cable Adapter |
>> For connecting the GX-R cable to R500 Wire Feeder EUR/EUR+
Welding torch cleaning and cutting station
| • | GX-R Cleaning and Cutting Station |
>> Optional
>> Delivered with a dedicated operating manual
For more information, refer to Kemppi.com.
