General

These instructions describe the use of Kemppi's Flexlite TX TIG welding torches. Flexlite TX torches are designed for manual welding in demanding industrial use and they are compatible with Kemppi TIG welding equipment with 4-pin or 7-pin connectors. Flexlite TX range covers both water-cooled and gas-cooled models.

Flexlite TX torches are available in series 3 and 5, each designed to serve specific welding needs.

Series 3	Series 5
TX 133	TX 135
TX 163	TX 165
TX 223	TX 225
TX 253	TX 255
TX 303	TX 305
TX 353	TX 355
	TX 455

Important notes

Read the instructions through carefully. For your own safety, and that of your working environment, pay particular attention to the safety instructions delivered with the equipment.

Items in the manual that require particular attention in order to minimize damage and harm are indicated with the below symbols. Read these sections carefully and follow their instructions.

Note: Gives the user a useful piece of information.

Caution: Describes a situation that may result in damage to the equipment or system.

Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.

 

Disclaimer While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the specification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit the contents of this guide without prior permission from Kemppi.