General
Kemppi's Digital Connectivity Module (DCM) is a small single-board computer connected directly to the welding power source or wire feeder. Together with WeldEye App, it collects and synchronizes welding data and adds tools to the workflow management, for example, in the form of work orders and welding procedure specifications (WPS). The welding data collected with DCM is synchronized with the WeldEye welding management software cloud via WeldEye App.
DCM communicates wirelessly with the mobile device.
DCM and WeldEye App are a new alternative for Kemppi's Smart Reader device. It is compatible with the following Kemppi welding equipment:
DCM also supports non-Kemppi welding equipment through ARC Euro Adapter -CV, ARC Saw Adapter and ARC Universal Adapter -CV/-TIG.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular attention to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the below symbols. Read these sections carefully and follow their instructions.
|
Note: Gives the user a useful piece of information. |
|
Caution: Describes a situation that may result in damage to the equipment or system. |
|
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury. |
|
Disclaimer
While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the specification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit the contents of this guide without prior permission from Kemppi.
|
