Updating DCM

To update the DCM firmware, follow these instructions.

Download update

1. Sign in to Kemppi software hub on your computer.
2. Connect a USB memory stick to the computer.
3. Download the firmware package from the Kemppi software hub’s Software> Firmware > DCM > page.

4. Save the firmware package file to the root folder of the USB memory stick.
5. Remove the USB memory stick from the computer.

Install update

1. Start the welding machine attached to the DCM and wait approx. 10 seconds until the DCM is on standby.
2. Insert the USB memory stick to the DCM’s USB connector.

>>  A green light starts to blink slowly.

3. Wait until the green light starts to blink rapidly.
4. Remove the USB memory stick from the DCM’s USB connector.

>>  DCM will automatically reboot.

5. Keep the DCM turned on for at least 1 minute. This allows the DCM to set the installed firmware as default.

>>  The update is now complete.