Installing label printer driver
This is an optional ArcValidator feature for printing a verification approval label. The supported label printer models are Kroko Pro 3600R and PearLabel 360 (a.k.a. Kroko 36C).
|
If the previous version of the ArcValidator label printer has been used with the computer, the old version of the printer driver software must be removed before installing the new version. |
|
|
Do not attempt to connect the label printer USB cable until instructed to do so. |
Printer driver
Follow the instructions below to install the necessary printer drivers for the label printer on your computer:
| 1. | Download the driver installation package (zip) here: https://apps.kemppi.com/pc/arcv/assets/krokodriver.zip. |
| 2. | Extract the zip file contents into their own folder. |
| 3. | Open the folder where the files were extracted. |
| 4. | Run setup.exe with administrative privileges (run as administrator). |
| 5. | Follow the installation wizard: |
>> Select your language (English / Finnish)
>> Select the "Install driver only" option
>> Read and confirm the license terms and conditions
>> Select the correct printer model: Kroko Pro 3600R or PearLabel 360 (Kroko 36C)
>> Select the USB connection option
>> Follow the on-screen instructions to connect the printer USB cable and power cord.
|
|
Kroko 36C will be automatically powered on once both, the USB cable and the power cord, are connected properly. |
Once the installation wizard is complete, close the wizard by clicking Finish.
Printer settings
Follow the instructions below to set up the correct paper for printing:
| 1. | Go to the Windows printers and scanners device settings. |
| 2. | Select your Kroko printer and continue to the printer's printing preferences. |
>> Manage > Printing preferences
| 3. | In paper settings, select "36mm(1-1/2") tape". |
| 4. | Confirm the settings by clicking OK. |
