Connectivity charts: MMA
|These charts describe the physical connectivity of the equipment in question only and should not be considered as a general recommendation for any welding task.|
|Always check that the welding gun/torch model's load capacity is suited for the currents used. E.g. Flexlite model "GX 253G" load capacity is 250 A, whereas "GX 403G" load capacity is 400 A.|
Use the below selectors to hide/show content in the connectivity chart.
|Flexlite TX TIG torches|
|Series 3, no support for gun remote:|
|TX163GVD9 (DIX 9 mm)||●||●|
|TX223GVD13 (DIX 13 mm)||●||●||●||●|
|Suitable handheld remote controls|
|R10 (Amphenol, 7-pin)||●||●||●||●|
|HR43 (10-pin, bajonet)||●|
|Suitable pedal remote controls|
|FR43 (10-pin, bajonet)||●|
* Discontinued product.
Letters with the Flexlite product model names stand for:
W = water-cooled, G = gas-cooled, MN = multi-neck, S = long cable.
Connector types mentioned in brackets ().
For more information on equipment configurations: Kemppi Configurator
|<<< Connectivity charts: TIG|