Connectivity charts: TIG
These charts describe the physical connectivity of the equipment in question only and should not be considered as a general recommendation for any welding task. |
Always check that the welding gun/torch model's load capacity is suited for the currents used. E.g. Flexlite model "GX 253G" load capacity is 250 A, whereas "GX 403G" load capacity is 400 A. |
Use the below selectors to hide/show content in the connectivity chart.
* Discontinued product.
Letters with the Flexlite product model names stand for: W = water-cooled, G = gas-cooled, MN = multi-neck, S = long cable. Connector types mentioned in brackets (). |
For more information on equipment configurations: Kemppi Configurator
<<< Connectivity charts: MIG | Connectivity charts: MMA >>> |