Connectivity charts: MIG

These charts describe the physical connectivity of the equipment in question only and should not be considered as a general recommendation for any welding task.
Always check that the welding gun/torch model's load capacity is suited for the currents used. E.g. Flexlite model "GX 253G" load capacity is 250 A, whereas "GX 403G" load capacity is 400 A.

 

= Primary compatibility

o = Secondary compatibility (welding gun remote not supported by the connected equipment)

 

Use the below selectors to hide/show content in the connectivity chart.

ClosedFlexlite GX(3) MIG guns

ClosedFlexlite GX(5) MIG guns

ClosedFlexlite GX(8) MIG guns

ClosedFlexlite GC MIG guns

ClosedFlexlite GF MIG guns

ClosedFlexlite TX TIG torches (MIG)

ClosedSuitable handheld remote controls

* Discontinued product.

Letters with the Flexlite product model names stand for:

W = water-cooled, G = gas-cooled, MN = multi-neck, S = long cable.

Connector types mentioned in brackets ().

 

For more information on equipment configurations: Kemppi Configurator

 

  Connectivity charts: TIG >>>